News and Views

Peter Swift writes from Derby, with more information following last time’s editorial:

You suggest that Bonds had moved out of London during the war. They were certainly still in Euston Road when I was at University in London in the early 1960s, on the south side of Euston Road near the top of Tottenham Court Road. They may have started the Midhurst premises during the war and then retreated to it again in the 1970’s when London prices drove them out. Re the “oldest model making company” title, I think Bassett Lowke win the British title but there were certainly earlier ones in Germany. As Historical Model Railway Society (HMRS) Archivist, I have access to a wide collection of material including model company catalogues* in the HMRS collection, and also working and public timetables, as well as many other working instructions etc for the railways, which are listed in the open access part of the HMRS website hmrs.org.uk. Unfortunately, there are not many Irish items.

*Peter has kindly provided me with a list of these, some undated, but going back to 1912, and including other pioneers such as the Leeds Model Co and Mills Brothers. If anyone wants more details, they can contact Peter at: archivist@hmrs.org

 

Amsies Models have recently added vinyl overlays for Irish mark 2 coaches to their N and 00 ranges. More designs will follow if sales show there is a demand for these products. Amsies Models, 1 Burgundy Gardens, Burnt Mills, Basildon, Essex SS13 1NP Tel: 01268 470712 Mobile: 07534 211694 E-mail: paul.amestoy@blueyonder.co.uk Website: http://www.amsiesmodels.co.uk/index.htm

 

Patrick O’Sullivan sends the following notes on these overlays:  
These are a new venture into the world of model railway for Paul and Victoria Amsie, and cover coaches in 4mm, 3.5mm and N-Gauge/2mm. with various liveries to suit ready-to-run vehicles.   The overlays can be produced in any livery regardles of how complicated it is, and made to suit the customer’s donor coach.  The finished colours are in good, strong colours and look superb.  Any Irish coach livery can be provided to suit the customer’s requirements, in any of the standard scales, i.e. 4mm, 3.5mm, 2mm, and N-Gauge, and with the required livery, and running numbers etc. The vinyl overlays are best suited to modern flat sided vehicles, having said that there is no reason that they could not be adopted for raised sided coaches, if one is prepared to file off the raised detail, stick on the self-adhesive vinyl overlay and then glue on pre-painted strips. This seems to be a big break through in the world of model railways, especially for those of us who model Irish rolling stock.  I have no doubt  that, while this is a new product, it will transform railway modelling.  Having seen this product first hand, I have no doubt that with a bit of forward thinking that overlays for  Irish private owner wagons could be produced. Paul is going to forward me some samples to review, and once I have done this I will post my findings and include a copy for the next editon of New Irish Lines. A full demonstration of the technique of vinyl overlays with photographs is available on Paul’s website at  http://www.amsiesmodels.co.uk 

Patrick has also come across a new photographic collection, and is at present sifting through the Irish section: Transport Treasury,  Logie Shannoch, Drumrossie, Insch, Aberdeenshire AB52 6LJ Tel: 01464-820717 Mobile: 07867 645410 E-mail: info@transporttreasury.co.uk Website: http://www.transporttreasury.co.uk/ 

 

David White (Whiteeno@aol.com)  writes from Scotland:
Perth Model Railway Club to go Irish: The members of Perth Model Railway Club (Scotland) have decided to commission two new model railway layouts. One of the two new layouts to be built by the members of Club will be an Irish model railway. The Club made their decision to have something different after they viewed a range of Irish rolling stock owned by David White who lives in nearby Newburgh, Fife. David owns a variety of Irish rolling stock allowing him to run trains from 1945 through to today. The building of this new layout will commence in July 2008, its first showing is expected to be at the Perth 2009 Exhibition. Would any Irish Club be interested in exhibiting at Perth in 2009?

 

Ciarán Cooney (e-mail: harcourtstation@gmail.com) writes:
I was photographing some West Clare Railway stations a few weeks ago, and I photographed one at Blackweir, which strangely featured some pre-1950s style road signs. I recall in the newsletter you sent me a while ago an article written by a modeller, Doncha Cronin, regarding these type of road signs, and whether any were in existence today. I just thought I should inform you as he and possibly others may find the photos of use  which I took. You can view them on this link on the website: http://eiretrains.com/Photo_Gallery/B/Blackweir/A&Bindex.html

 

These two pictures from Tony Hewitt (hewittht@tiscali.co.uk) show a model of Schull & Skibereen Railway no. 4 which he has built from various woods, ranging from 1mm plywood upwards. The wheels are made from ash, two varieties of mahogany and cocktail sticks Smaller components are turned on a lathe, and there are some brass parts for the cow-catcher and smoke-box fittings. The builder tells me he became a grandfather while building the model, and the latest addition to his family also rejoices in the name Erin!

 

Recent writings on Irish railways include:Anonymous (2008) Red Line: longer trams, shorter line Tramways & Urban Transit 71(848): 294, 295 [news paragraph and photograph]

Anonymous (2008) TRAM Power proposes trams for Galway Tramways & Urban Transit 71(848): 296 [news paragraph]

Pulling N (2008) LUAS gets to The Point Tramways & Urban Transit 71(846); 216-7 (June) [includes photos of work at Sandyford]

Pulling N (2008) Dublin Expansion Tramways & Urban Transit 71(850): 376 [LUAS extension]Heritage Rail May-June 2008 CDR goes for Barnesmore

Jones B, Fearn D (2008) Ireland on the move. Rail no. 596: 46-52 (July 16-29

Flanagan C (2008) The Green Pullman Railway Modeller 59: 489 (July) [00 gauge model]For any one trying to find items listed in the IRRS bibliographies from  Linkline magazine, try the following website: http://www.businessandfinance.ie/client-publishing/ClientPublishingNewsletter.htm

For any N-gauge Irish modellers, there are now alternative and complementary group on MSN and Yahoo, so you can join in the debate whatever your preference for on-line groups:
http://groups.yahoo.com/group/irish_n

http://groups.msn.com/IrishNGaugeModellers

Other potentially useful websites are:Ernie’s Irish Railway Photos: http://erniesirishrailwayphotos.fotopic.net/Irish station photographs: http://eiretrains.com/Stations_index.htmIrish  Model Railways: http://www.irishrailwaymodels.com/

 

Following Doncha Cronin’s picture of an Italian version of the CIE G-class (May issue, p.26 ), it seems that there may have been an Iberian branch of the family as well. I took the above photo at the railway museum at Gijon, in Northern Spain earlier this year: the museum has a fascinating collection of broad and narrow gauge and industrial equipment and is well worth a visit. This machine is Deutz no. 57706, built 1964, type B, DH, 140HP 20tons weight, eight cylinders, and it shunted private sidings in the nearby Trubia armaments factories. It runs on the Spanish broad gauge of 5’ 6” (1670mm).

 

Following Doncha Cronin’s picture of an Italian version of the CIE G-class (May issue, p.26 ), it seems that there may have been an Iberian branch of the family as well. I took the above photo at the railway museum at Gijon, in Northern Spain earlier this year: the museum has a fascinating collection of broad and narrow gauge and industrial equipment and is well worth a visit. This machine is Deutz no. 57706, built 1964, type B, DH, 140HP 20tons weight, eight cylinders, and it shunted private sidings in the nearby Trubia armaments factories. It runs on the Spanish broad gauge of 5’ 6” (1670mm). Foxrock Models first two kits for the Cork, Blackrock & Passage Railway brake van and open goods wagon are both now available (see may issue, p. 29). Both kits are also suitable for use in CIE days on the CLR section. The resin bodies and etched underframes are very well produced, and there is an excellent detailed instruction sheet including prototype information, and these should prove ideal modelling projects for the lengthening winter evenings for Irish narrow gauge modellers. The brake van kit costs £17 and the open wagon £15, both inclusive of postage there is a 10% discount on multiples of five kits.  Orders should be sent to Simon de Souza at: Foxrock Models, 7 Ennerdale Road, Reading, Berkshire, RG2 7HH (e-mail: simon.desouza@btinternet.com), cheques payable to “Simon de  Souza.” Simon has plans for future kits for  the Cavan and Leitrim open wagon and  milk-van/brake van, but clearly investing the time in producing these will depend on sales for the first two kits showing that this is a viable market.

 

A group has formed with the objective of opening a preserved 5′ 3″ gauge line in the Republic of Ireland. Some of you may recall that in a previous editorial, I posed the question of which former lines might support such a scheme. For further details see:  http://www.heritagerailway.ie/index.html

 

Alistair Rolfe of No Nonsense Kits has re-introduced the cast ends for the GNR(I) AEC railcars (at £7-50 per pair) and cosmetic bogie sides (at £4-00 for four bogie sides i.e. enough for one vehicle, but will need an etched frame to produce a running bogie) from the old MTK moulds. The ends seem closer to the later CIE push-pull versions of these vehicles, but can be cleaned up to the original GNR form. It appears that these components complement the Worsley etches for these vehicles, and the cast ends may be easier to use than shaping the ends from the etched parts, although the inner end was (we think!) flat  and may be easier to make from brass than to clean up the MTK casting, which was copied from the GW Collett suburban Bow-end (without steps). However, Alistair can supply these at £5 per pair if bought with the cab fronts. Most of the MTK Irish locos are currently being re-tooled, as a mixture of etchings and castings. They should be re-released over the next few years and NNK is developing a six-wheel mechanism which will provide the correct wheelbase for the larger locos. For four-wheel bogies they suggest Black Beetles. All kits will be suitable for 21mmgauge. The MTK Irish coach kits were usually aluminium body shells with cast ends, though the Park Royals, and Mk.II air-conditioned stock were etched. The Dart was also etched, with cast ends, though much of the tooling is a bit too rough to re-use. Unfortunately it is not practical (or viable) to produce short runs of aluminium-bodied kits, while the tooling for the etched body shells is very scruffy. It is not expensive to replace the artwork for the etchings, but if re-drawing it would make sense to get everything right. So, at present Alistair trying to gather information on the rolling stock, with a view to releasing complete kits, but there are some technical limitations to what can be done for the moment. He hopes to expand his machine-tool range  to produce pre-formed body shells to the correct dimension, but this depends on a number of things, including finance and any specific demands from modellers may push specific items up the  priority  “to do”  list!

P&P to the UK is £2 for orders up to £20, 10% thereafter. P&P to Eire is a little more, and will be advised on ordering. No Nonsense Kits now has a PayPal account, and can accept on-line payments: this should save the cost of Sterling bank drafts etc. for customers in the Republic. Otherwise, payment is by cheques or Postal Orders,  crossed, payable to “No Nonsense Kits.” Contact details: No Nonsense  Kits, PO Box 1009, Cardiff CF23 7YB Tel. 029 2031 7212 E-mail:  nnk.website@ntlworld.com Website: http://www.nnkits.co.uk/

 

Worsley’s latest etchings are for the Schull & Skibereen Railway: http://www.worsleyworks.com. Etched sides for the GSR Pullman cars are expected shortly.

 

Denis Bates writes from Aberystwyth with further information on two items in the last issue: 

GNR (I) Drovers’ vans: I’ve actually made a model of No.3, using the photo of 1957, and the line drawings, which I got from Tony Miles. Interesting that the doors say “drovers” although there are no side windows, nor the pot lamps on the roof. Does the inscription mean that they were still being used for drovers at that date? The differences between the two are interesting also. No.3 has wooden frames, and the outside vertical pillars extend down over the solebars. Nos.97 and 98 have steel frames, and the bodies are wider. Tare weight is greater at 15T. 

UTA rail tractor: I have vague memories of one of these. I think it was actually built on a coach bogie, and didn’t have a “cab”. I think it was also used for a “goods train” – pulling a single wagon of coal from Queen’s Quay to Hollywood for a coal merchant based in the goods yard. I was in Sullivan Upper School there at the time. 

[from Bill Scott’s new book on NCC locos, p. 165, it seems that when NCC railcar no. 2, built 1934, was withdrawn in 1954, the chassis and engines were used to make two of these tractors. Ed]

 

Another supplier of card kits for Irish narrow gauge wagon bodies is Hamlin Industries, 79 Harlington Road, Hillingdon, Middlesex UB8 3HY 

E-mail:shamlin@hamlinindustries.com
Web-site:  http://www.hamlinindustries.com/

 

I am grateful to our member Jim Fogarty for the following more direct link to the An Post die-cast models, and specifically the Morris LD150: 
http://www.irishstamps.ie/webapp/commerce/command/CategoryDisplay?cgrfnbr=9256&cgmenbr=3421&cat_name=Collectibles/Coins%20&%20Postcards

 

In addition to his gazetteer mentioned on p. 32 of the May issue, Ralph Rawlinson now also has produced A ‘Register of Closed Railways’ which is on line at: http://www.closedlines.free-online.co.uk/index.htm

 

As many will know, the very useful SSM range of kits and components has been in limbo for some time, but we now have good news from our member Des Sullivan:

SSM under New Ownership
I am delighted to formally announce that I have taken over Studio Scale Models from Paul Green as of last July.  A big thank you is owed to Paul as he has been most supportive and understanding in helping to get a handle on the various elements of the business.  The entire range will be re-released, with all instructions revised and updated (over time), fully sprung buffers on the larger engine kits and transfer packs comprising of numbering, lining and crests or icons as appropriate. Some of the models will not be available right away (T2, SG and brake van) as I need to get moulds remade for some of the castings, but I will be accepting pre-orders for these.  Prices will be finalised in the weeks to come. The full range is as follows:

Engines
GSWR/GSR/CIE J15 0-6-0 tender engine
GNR(I) S class 4-4-0 tender engine
GNR(I) SG class 0-6-0 tender engine
GNR(I) T2 4-4-2T
MGWR E class/CIE J26 0-6-0T

Coaches
GSWR six-wheeled five coach set
GNR(I)/CIE K15 open third bogie coach
GNR(I)/CIE L12 bogie brake third coach

Freight
GNR(I)/CIE 20-ton brake van
GSWR/GSR/CIE convertible wagon
MGWR/CIE convertible wagon

Subsets
GNR(I)/CIE 57′ or 60′ coach underframe
GNR(I)/CIE elliptical coach roof
GNR(I)/CIE coach castings pack
GNR(I) fishbelly bogie sides
Etched W-irons and brake gear

Contact me on dezsullivan@eircom.net or write to me at: 5 Radharc na hInse, Ballybeg, Ennis, Co. Clare.

Advertisements

1 Comment

Filed under News and Views

One response to “News and Views

  1. This was a very great understand I really like articles like this and I’ve bookmarked this web page to verify back again.

Leave a Reply

Please log in using one of these methods to post your comment:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s